Page Title goes here

site description



Following is a list of our Grappler models, and their components:



The GR-7200 series Grapple base is available in 4’, 5’ and 6’ widths and is available with a loader specific attaching design or a universal fit. The tines are made of 1-5/8” round, 1045 alloy steel and bolt into the frame which makes them replaceable if needed. They have 5, 7 & 8 tines respectively. A taper on the front allows the tines to be easily inserted into the work area. The frame is constructed of 3” x 3” square tubing for strength and durability.

The DT series hay spear mounted with the GR-7000 series.  The DT unit can now effectively be a 3-n-1 multipurpose unit. A Dual Tine Hay Spear, Pallet Fork, and a Grappler, all from the use of one frame. The Grappler doesn’t need to be removed when using the unit as a Pallet Fork or Hay Spear. Talk about versatility! The Grappler comes assembled with the Hydraulic Cylinder. All of our products are built in the USA using manufacturing techniques developed to meet the needs of today’s farming and construction industry. Aldomi products come with a limited lifetime warranty to the original purchaser. The Hydraulic Cylinder is warranted by the manufacturer.

The GR-7000 series .  Upon designing the Grappler Add-On, the versatility of our current units was utilized so that one more low-cost function could be added with ease.  The GR-7000 can be added to the DT series, SF series, GR-7200 series, and GR-7400 series frames.  With the purchase of the BT-7100, the GR-7000 also becomes adaptable to any loader bucket as well !  What versatility!  The cylinder is included with the grappler add-on.

The GR-7000b series  was designed for bucket mounting. With the purchase of the BT-7100, the GR-7000b becomes adaptable to any loader bucket!  The cylinder is included with the grappler add-on. 

The GR-7400 series. Shown to the left is the GR-7000 top mounted to the GR-7410 Skid Steer QA base. THE 7400 SERIES GRAPPLERS HAVE A SOLID BASE AND HARDENED STEEL CUTTING EDGE

The BT-7100 series is designed to mount onto most loader buckets, with bolts or welding. The vertical braces are pre-drilled for bolt insertion. The GR-7000 Grapple simply pins to the Bucket Tube for ease of operation. The Tube comes in standard widths of 4’, 5’, 6’, and 7’, but can be customized for any bucket width.  

The BT-7100 is designed to fit buckets 4’, 5', 6' and 7'. Other sizes are available upon request. This Bucket Tube is predrilled to allow the unit to bolt-on to the bucket or it can be welded. This unit accepts the GR-7000, GR-7050, and GR-7000b Grapple. The BT-7100 is constructed of 3 X 3 steel tubing and is solid welded. These units are built specific to your bucket order, so please measure the bucket width exactly before ordering.

















































We build attachments for the following loader brands:

Allied/Buhler®, Bob Cat®, Bradco®, Branson®, Bush-Hog®, Case®, Century®, Cub Cadet®, Gehl®, Great Bend®, Jinma®, John Deere®, KD®, Kioti®, Koyker®, Kubota®, Long®, Mahindra®, MF®, Montana®, New Holland®, Skid Steer®, Tas®, Thomas®, TYM®, Yanmar®, Zetor®

For specific model information and prices please contact your local dealer using our Aldomi Dealer Locations tool.